Custom UV Lamps That Actually Fit Your Shop
If you run a small or mid-sized print shop, you’ve probably felt that annoying gap in the market. You need high-spec UV curing to get the job done, but the industrial arrays out there are way too big—and way too expensive—for what you actually need. That’s where we come in. We build custom UV lamps that hit that sweet spot: plenty of power, but without the bloated price tag. Getting the power right We don’t do “one size fits all.” We build these to your exact footprint. Need a specific wattage to speed up your curing? A weird length to fit into an old conveyor slot? Just let us know, and we’ll spec it out. Here is a bit of a heads-up, though. If you go for a high-wattage build to handle thick ink layers, you’re dealing with a lot of heat. It’s just physics. If you’re pushing a ton of power into a small tube, make sure your cooling fans or water jackets can handle the load. Otherwise, you’re just paying to burn out your bulbs early. The stuff we use We use high-purity quartz glass. Why? Because cheap glass blocks the wavelengths you actually need. It’s a waste of electricity and a headache for your workflow. And we’re obsessive about the fit. We keep the tolerances tight so the lamp sits exactly where it belongs in the reflector. It sounds like a small detail, but if you’re off by even a few millimeters, you get “dead zones.” There is nothing worse than pulling a print off the line only to find it’s still tacky in the middle. How it works for you Think of these as easy drop-in replacements or the heart of a new, compact line. We’ve stripped away the fancy brand markups and focused on the actual science of the cure. You get the same output as the big-name enterprise brands, but you aren’t paying for their marketing budget. We handle the hardware. You just wire it to your ballast, set your line speed, and get back to printing.